The Lanparte Complete Kit for the Sony PXW-FS5 includes the FS5 Extension Arm, ARRI Rosette Handgrip, Double ARRI Rosette Lock Threaded Hole with Double Rod Clamp, Top Cheese Plate for FS5, the Magic-Arm, FS5 Monitor Extension Arm, V-Mount Shoulder Support V2, V-Mount Battery Pinch, FS5 Camera DC Power Cable, the ABS Matte Box, with Follow Focus and Gear Ring, and a Protective Case for your rig.
The FS5 Extension Arm is specifically designed to work with the original handgrip of the Sony PXW-FS5 and a baseplate or shoulder rig (available separately). It allows you to position the handgrip at an extended distance from the camera, increasing the overall stability of the rig and making operation more comfortable. This arm features a handily incorporated LANC cable, allowing you to maintain use of all the handgrip's controls.
Offering ARRI-standard rosette adapters on both sides, the 15mm rod-compatible Dual Rod Clamp allows you to attach and adjust rosette-mount handgrips on your shoulder rig. Use the Sony PXW-FS5 Utility Top Plate to add multiple accessory mounting–points to your camera. Mount a 1/4"-20 accessory to your 15mm LWS rig with the Magic Arm, and gain the flexibility to fit it in nearly any orientation you require. The EVF Extension Arm for the FS5 allows you to extend and reposition the EVF for increased viewing comfort.
Build up your DSLR, mirrorless, or camcorder to fit on your shoulder with the V-Mount Shoulder Support V2. An arched pad makes up most of the base of the Shoulder Mount, providing a comfortable platform for the rig to rest on your shoulder. Power your camera rig with the VBP-01 V-Mount Battery Pinch. Featuring multiple power outputs and an integrated HDMI splitter, this unit provides effective power and video signal management. The DC Power Cable provides power to your FS5 via the Battery Pinch.
The MB-01 4×4 Rod-Mounted DSLR Swing-Away Matte Box fits lenses with a maximum front outer diameter of 100mm. It features ABS plastic and aluminum construction, making it lightweight. The Follow Focus V2 clamps onto 15mm LWS rods, allowing you to smoothly and accurately pull focus with cinema and DSLR lenses equipped with gear rings. The Gear Ring with Pin-Lock Tightening Mechanism for Follow Focus is a rubber gear with a standard pitch of 0.8, and a maximum diameter of 4.1". The durable and watertight ABS Protection Case features a custom pre-cut foam interior designed to hold and protect the key components of Lanparte DSLR camera rig kits.
- Designed for the Sony PXW-FS5
- Fully adjustable 2" Arri-style rosette extension included
- Built-in 3-pin LANC cable maintains all handgrip controls
- Adds approximately 1' to the handgrip length, and 2" to the baseplate width
- Aluminum construction
- Angle-adjustable
- CNC machined aluminum construction
- Rotatable design increases viewing-angle options
- Extends the EVF up to 4" from its original mounting position
- Thumbscrew enables quick, tool-free installation
- Installs on the camera's original EVF mount
- Made from lightweight black-finished aluminum
- V-Mount lock on bottom of shoulder support
- Quick release system with safety trigger
- Mountable on VCT-14 via the tail lock
- Adjustable rod height
- 15mm Rod connectors
- Ergonomic shoulder pad
- Spirit level
- CNC machined
- Hollow design, lightweight at 3 lb
- Battery charging input
- V-Mount
- Built-in HDMI splitter
- 15mm rod connectors
- USB charging port for mobile devices
- Can be mounted to the back of the rig as counterweight
- Allows the use of longer-running V-Mount batteries with the Sony PXW-FS5
- Works with the LanParte V-Mount battery adapter
- Compatible with any 12 VDC device with a 2.1 x 5.5mm port
- Lightweight Construction
- The matte box itself is made out of ABS plastic, with aluminum used for the support structure. This provides a lightweight yet sturdy unit that is appropriate for shooting hand-held or with a stabilizer rig, when every ounce counts.
- Swing Away Design
- The swing-away design allows you to quickly move the matte box out of the way to check or change lenses, without having to remove the matte box from the support rods. This way you don't have to hand off the matte box to someone else, hold it under an arm or between your knees, or hang it under the rods while you work, greatly speeding your workflow and reducing the chance of dropping the matte box or having a filter tray fall out.
- Rotating 4 x 4 Filter Trays
- The matte box features two independently rotating 4 x 4 filter trays; this allows you to simultaneously rotate two filters, such as one polarizer and one graduated filter, or even two graduated filters, for creative effect. The filter stages each rotate 90° and feature a tray locking knob, which allows you to adjust the height of the filter and lock it in place. This is a useful feature when using graduated filters in your matte box. The filter trays feature a center detent, so you can easily position them exactly in the middle.
- Top & Side Flags
-
- The removable top and side flags provide you additional flare control and attach to the matte box with a lockable hinged assembly. This allows you to precisely set your flags to match the edge of frame for different lenses and lock them in place so that they don't move during the shot.
- Each side flag is made from two pieces with a pivot point that allows you to pivot the outer flap approximately 45° providing additional height so that the side flags can butt up against the top flag when it is in a raised position. The outer flap of the side flags run in a track, and a locking thumb nut allows you to lock the side flags pivot adjustment.
- Anti-Reflection Inserts
- The four included anti-reflection inserts work with your lenses. They provide a light-tight seal so that light from behind the camera cannot leak through where the lens joins the matte box and reflect off filters to flare your image.
- Key Features
-
- Clamps onto 15mm LWS rods
- Integrated A/B hard stops
- Copper gear and precision bearing
- Standard 0.8 pitch drive gear included
- Drive gear can be flipped to either side of gearbox
- Sliding dovetail design for adjusting to different sized lenses
- Removable magnetic marking disc
- ARRI standard 12mm accessory port
- CNC machined aluminum components
- Adjustable lens gear ring included
- Pre-cut foam interior fits:
- DSLR with C-Arm Support
- Adjustable baseplate
- Follow focus
- Matte box
- French flags
- Top handle
- Shoulder support and power supply system
- Universal Grip
- Magic Arm
- 8" HDMI monitor
- Designed for the Sony PXW-FS5
- Fully adjustable 2" Arri-style rosette extension included
- Built-in 3-pin LANC cable maintains all handgrip controls
- Adds approximately 1' to the handgrip length, and 2" to the baseplate width
- Aluminum construction
- Angle-adjustable
- CNC machined aluminum construction
- Rotatable design increases viewing-angle options
- Extends the EVF up to 4" from its original mounting position
- Thumbscrew enables quick, tool-free installation
- Installs on the camera's original EVF mount
- Made from lightweight black-finished aluminum
- V-Mount lock on bottom of shoulder support
- Quick release system with safety trigger
- Mountable on VCT-14 via the tail lock
- Adjustable rod height
- 15mm Rod connectors
- Ergonomic shoulder pad
- Spirit level
- CNC machined
- Hollow design, lightweight at 3 lb
- Battery charging input
- V-Mount
- Built-in HDMI splitter
- 15mm rod connectors
- USB charging port for mobile devices
- Can be mounted to the back of the rig as counterweight
- Allows the use of longer-running V-Mount batteries with the Sony PXW-FS5
- Works with the LanParte V-Mount battery adapter
- Compatible with any 12 VDC device with a 2.1 x 5.5mm port
- Lightweight Construction
- The matte box itself is made out of ABS plastic, with aluminum used for the support structure. This provides a lightweight yet sturdy unit that is appropriate for shooting hand-held or with a stabilizer rig, when every ounce counts.
- Swing Away Design
- The swing-away design allows you to quickly move the matte box out of the way to check or change lenses, without having to remove the matte box from the support rods. This way you don't have to hand off the matte box to someone else, hold it under an arm or between your knees, or hang it under the rods while you work, greatly speeding your workflow and reducing the chance of dropping the matte box or having a filter tray fall out.
- Rotating 4 x 4 Filter Trays
- The matte box features two independently rotating 4 x 4 filter trays; this allows you to simultaneously rotate two filters, such as one polarizer and one graduated filter, or even two graduated filters, for creative effect. The filter stages each rotate 90° and feature a tray locking knob, which allows you to adjust the height of the filter and lock it in place. This is a useful feature when using graduated filters in your matte box. The filter trays feature a center detent, so you can easily position them exactly in the middle.
- Top & Side Flags
-
- The removable top and side flags provide you additional flare control and attach to the matte box with a lockable hinged assembly. This allows you to precisely set your flags to match the edge of frame for different lenses and lock them in place so that they don't move during the shot.
- Each side flag is made from two pieces with a pivot point that allows you to pivot the outer flap approximately 45° providing additional height so that the side flags can butt up against the top flag when it is in a raised position. The outer flap of the side flags run in a track, and a locking thumb nut allows you to lock the side flags pivot adjustment.
- Anti-Reflection Inserts
- The four included anti-reflection inserts work with your lenses. They provide a light-tight seal so that light from behind the camera cannot leak through where the lens joins the matte box and reflect off filters to flare your image.
- Key Features
-
- Clamps onto 15mm LWS rods
- Integrated A/B hard stops
- Copper gear and precision bearing
- Standard 0.8 pitch drive gear included
- Drive gear can be flipped to either side of gearbox
- Sliding dovetail design for adjusting to different sized lenses
- Removable magnetic marking disc
- ARRI standard 12mm accessory port
- CNC machined aluminum components
- Adjustable lens gear ring included
- Pre-cut foam interior fits:
- DSLR with C-Arm Support
- Adjustable baseplate
- Follow focus
- Matte box
- French flags
- Top handle
- Shoulder support and power supply system
- Universal Grip
- Magic Arm
- 8" HDMI monitor
- Designed for the Sony PXW-FS5
- Fully adjustable 2" Arri-style rosette extension included
- Built-in 3-pin LANC cable maintains all handgrip controls
- Adds approximately 1' to the handgrip length, and 2" to the baseplate width
- Aluminum construction
- Angle-adjustable
- CNC machined aluminum construction
- Rotatable design increases viewing-angle options
- Extends the EVF up to 4" from its original mounting position
- Thumbscrew enables quick, tool-free installation
- Installs on the camera's original EVF mount
- Made from lightweight black-finished aluminum
- V-Mount lock on bottom of shoulder support
- Quick release system with safety trigger
- Mountable on VCT-14 via the tail lock
- Adjustable rod height
- 15mm Rod connectors
- Ergonomic shoulder pad
- Spirit level
- CNC machined
- Hollow design, lightweight at 3 lb
- Battery charging input
- V-Mount
- Built-in HDMI splitter
- 15mm rod connectors
- USB charging port for mobile devices
- Can be mounted to the back of the rig as counterweight
- Allows the use of longer-running V-Mount batteries with the Sony PXW-FS5
- Works with the LanParte V-Mount battery adapter
- Compatible with any 12 VDC device with a 2.1 x 5.5mm port
- Lightweight Construction
- The matte box itself is made out of ABS plastic, with aluminum used for the support structure. This provides a lightweight yet sturdy unit that is appropriate for shooting hand-held or with a stabilizer rig, when every ounce counts.
- Swing Away Design
- The swing-away design allows you to quickly move the matte box out of the way to check or change lenses, without having to remove the matte box from the support rods. This way you don't have to hand off the matte box to someone else, hold it under an arm or between your knees, or hang it under the rods while you work, greatly speeding your workflow and reducing the chance of dropping the matte box or having a filter tray fall out.
- Rotating 4 x 4 Filter Trays
- The matte box features two independently rotating 4 x 4 filter trays; this allows you to simultaneously rotate two filters, such as one polarizer and one graduated filter, or even two graduated filters, for creative effect. The filter stages each rotate 90° and feature a tray locking knob, which allows you to adjust the height of the filter and lock it in place. This is a useful feature when using graduated filters in your matte box. The filter trays feature a center detent, so you can easily position them exactly in the middle.
- Top & Side Flags
-
- The removable top and side flags provide you additional flare control and attach to the matte box with a lockable hinged assembly. This allows you to precisely set your flags to match the edge of frame for different lenses and lock them in place so that they don't move during the shot.
- Each side flag is made from two pieces with a pivot point that allows you to pivot the outer flap approximately 45° providing additional height so that the side flags can butt up against the top flag when it is in a raised position. The outer flap of the side flags run in a track, and a locking thumb nut allows you to lock the side flags pivot adjustment.
- Anti-Reflection Inserts
- The four included anti-reflection inserts work with your lenses. They provide a light-tight seal so that light from behind the camera cannot leak through where the lens joins the matte box and reflect off filters to flare your image.
- Key Features
-
- Clamps onto 15mm LWS rods
- Integrated A/B hard stops
- Copper gear and precision bearing
- Standard 0.8 pitch drive gear included
- Drive gear can be flipped to either side of gearbox
- Sliding dovetail design for adjusting to different sized lenses
- Removable magnetic marking disc
- ARRI standard 12mm accessory port
- CNC machined aluminum components
- Adjustable lens gear ring included
- Pre-cut foam interior fits:
- DSLR with C-Arm Support
- Adjustable baseplate
- Follow focus
- Matte box
- French flags
- Top handle
- Shoulder support and power supply system
- Universal Grip
- Magic Arm
- 8" HDMI monitor
- Designed for the Sony PXW-FS5
- Fully adjustable 2" Arri-style rosette extension included
- Built-in 3-pin LANC cable maintains all handgrip controls
- Adds approximately 1' to the handgrip length, and 2" to the baseplate width
- Aluminum construction
- Angle-adjustable
- CNC machined aluminum construction
- Rotatable design increases viewing-angle options
- Extends the EVF up to 4" from its original mounting position
- Thumbscrew enables quick, tool-free installation
- Installs on the camera's original EVF mount
- Made from lightweight black-finished aluminum
- V-Mount lock on bottom of shoulder support
- Quick release system with safety trigger
- Mountable on VCT-14 via the tail lock
- Adjustable rod height
- 15mm Rod connectors
- Ergonomic shoulder pad
- Spirit level
- CNC machined
- Hollow design, lightweight at 3 lb
- Battery charging input
- V-Mount
- Built-in HDMI splitter
- 15mm rod connectors
- USB charging port for mobile devices
- Can be mounted to the back of the rig as counterweight
- Allows the use of longer-running V-Mount batteries with the Sony PXW-FS5
- Works with the LanParte V-Mount battery adapter
- Compatible with any 12 VDC device with a 2.1 x 5.5mm port
- Lightweight Construction
- The matte box itself is made out of ABS plastic, with aluminum used for the support structure. This provides a lightweight yet sturdy unit that is appropriate for shooting hand-held or with a stabilizer rig, when every ounce counts.
- Swing Away Design
- The swing-away design allows you to quickly move the matte box out of the way to check or change lenses, without having to remove the matte box from the support rods. This way you don't have to hand off the matte box to someone else, hold it under an arm or between your knees, or hang it under the rods while you work, greatly speeding your workflow and reducing the chance of dropping the matte box or having a filter tray fall out.
- Rotating 4 x 4 Filter Trays
- The matte box features two independently rotating 4 x 4 filter trays; this allows you to simultaneously rotate two filters, such as one polarizer and one graduated filter, or even two graduated filters, for creative effect. The filter stages each rotate 90° and feature a tray locking knob, which allows you to adjust the height of the filter and lock it in place. This is a useful feature when using graduated filters in your matte box. The filter trays feature a center detent, so you can easily position them exactly in the middle.
- Top & Side Flags
-
- The removable top and side flags provide you additional flare control and attach to the matte box with a lockable hinged assembly. This allows you to precisely set your flags to match the edge of frame for different lenses and lock them in place so that they don't move during the shot.
- Each side flag is made from two pieces with a pivot point that allows you to pivot the outer flap approximately 45° providing additional height so that the side flags can butt up against the top flag when it is in a raised position. The outer flap of the side flags run in a track, and a locking thumb nut allows you to lock the side flags pivot adjustment.
- Anti-Reflection Inserts
- The four included anti-reflection inserts work with your lenses. They provide a light-tight seal so that light from behind the camera cannot leak through where the lens joins the matte box and reflect off filters to flare your image.
- Key Features
-
- Clamps onto 15mm LWS rods
- Integrated A/B hard stops
- Copper gear and precision bearing
- Standard 0.8 pitch drive gear included
- Drive gear can be flipped to either side of gearbox
- Sliding dovetail design for adjusting to different sized lenses
- Removable magnetic marking disc
- ARRI standard 12mm accessory port
- CNC machined aluminum components
- Adjustable lens gear ring included
- Pre-cut foam interior fits:
- DSLR with C-Arm Support
- Adjustable baseplate
- Follow focus
- Matte box
- French flags
- Top handle
- Shoulder support and power supply system
- Universal Grip
- Magic Arm
- 8" HDMI monitor
- Designed for the Sony PXW-FS5
- Fully adjustable 2" Arri-style rosette extension included
- Built-in 3-pin LANC cable maintains all handgrip controls
- Adds approximately 1' to the handgrip length, and 2" to the baseplate width
- Aluminum construction
- Angle-adjustable
- CNC machined aluminum construction
- Rotatable design increases viewing-angle options
- Extends the EVF up to 4" from its original mounting position