Uncategorized

ITC100HP2K ITC-100 Intercom, 4x HP-2A Headsets, 4 x ITC-100SL Beltpack and Tallylights Kit

This Datavideo ITC100HP2K ITC-100 Intercom, 4x HP-2A Headsets, 4 x ITC-100SL Beltpack and Tallylights Kit combines an 8-channel intercom system and 65' connecting cables with belt packs, tally lights, and upgraded headsets for 4 users.

The Datavideo ITC-100 is an 8 remote user and base station wired intercom with included tally lights that can use low cost headsets (included) or high quality professional units. Users are connected to the base station via belt packs with the included 65' 5-pin XLR cables. The beltback can be connected with a cable up to 650' from the base station.

The Datavideo HP2A Double-Ear Headset features a closed-back design to reduce outside noise, a soft circumaural earpad and a noise-cancelling microphone. The headphone speaker resists clipping during loud monitoring.

The Datavideo ITC-100SL includes a belt pack and tally light, and it uses the high-grade HP-1 Single-Ear Headset/Microphone.

Please see the links below for more information on the various components of this kit.One of the innovative features of the rack-mountable ITC-100 8-User Wired Intercom System with 4 Beltbacks & 4 Headsets from Datavideo is that it can use headsets ranging from low-cost cell phone headsets to high-quality professional units.

Up to 8 users can be connected to the ITC-100 via PTT wired beltpacks. Four beltpacks, four headsets, four cables and a tally light set are all included. Cables for connecting the beltpacks may be up to 984 ft long, and use 5-pin XLR connectors. The base station features all call and mute buttons, a mic input, built-in speaker, and standard headphone jacks.The Datavideo HP2 Dual-Ear Headset is compatible with Datavideo ITC Intercom Systems. It features a closed-back design to reduce outside noise, soft circumaural earpads and a noise-cancelling microphone. The headphone drivers resist clipping during loud monitoring.The ITC-100SL is a replacement/expansion wired beltpack receiver for use with the ITC-100 intercom system from Datavideo. The ITC-100 includes 4 ITC-100SL beltpacks, but can support up to 4 additional units to support 8 total users.

One of the key features of the ITC-100SL is that it has a standard 3.5mm headphone jack so that you may use any headset you choose, ranging from inexpensive cell-phone sets all the way up to expensive professional models. It also has a 2.5mm jack for Motorola earphones. Other features of the ITC-100SL include call and talk buttons, volume control, a tally light, and a 5-pin XLR connector for talkback, power, and a tally indicator.
This Datavideo ITC100HP2K ITC-100 Intercom, 4x HP-2A Headsets, 4 x ITC-100SL Beltpack and Tallylights Kit from B&H combines an 8-channel intercom system and 65' connecting cables with belt packs, tally lights, and upgraded headsets for 4 users.

The Datavideo ITC-100 is an 8 remote user and base station wired intercom with included tally lights that can use low cost headsets (included) or high quality professional units. Users are connected to the base station via belt packs with the included 65' 5-pin XLR cables. The beltback can be connected with a cable up to 650' from the base station.

The Datavideo HP2A Double-Ear Headset features a closed-back design to reduce outside noise, a soft circumaural earpad and a noise-cancelling microphone. The headphone speaker resists clipping during loud monitoring.

The Datavideo ITC-100SL includes a belt pack and tally light, and it uses the high-grade HP-1 Single-Ear Headset/Microphone.

Please see the links below for more information on the various components of this kit.One of the innovative features of the rack-mountable ITC-100 8-User Wired Intercom System with 4 Beltbacks & 4 Headsets from Datavideo is that it can use headsets ranging from low-cost cell phone headsets to high-quality professional units.

Up to 8 users can be connected to the ITC-100 via PTT wired beltpacks. Four beltpacks, four headsets, four cables and a tally light set are all included. Cables for connecting the beltpacks may be up to 984 ft long, and use 5-pin XLR connectors. The base station features all call and mute buttons, a mic input, built-in speaker, and standard headphone jacks.The Datavideo HP2 Dual-Ear Headset is compatible with Datavideo ITC Intercom Systems. It features a closed-back design to reduce outside noise, soft circumaural earpads and a noise-cancelling microphone. The headphone drivers resist clipping during loud monitoring.The ITC-100SL is a replacement/expansion wired beltpack receiver for use with the ITC-100 intercom system from Datavideo. The ITC-100 includes 4 ITC-100SL beltpacks, but can support up to 4 additional units to support 8 total users.

One of the key features of the ITC-100SL is that it has a standard 3.5mm headphone jack so that you may use any headset you choose, ranging from inexpensive cell-phone sets all the way up to expensive professional models. It also has a 2.5mm jack for Motorola earphones. Other features of the ITC-100SL include call and talk buttons, volume control, a tally light, and a 5-pin XLR connector for talkback, power, and a tally indicator.
This Datavideo ITC100HP2K ITC-100 Intercom, 4x HP-2A Headsets, 4 x ITC-100SL Beltpack and Tallylights Kit from B&H combines an 8-channel intercom system and 65' connecting cables with belt packs, tally lights, and upgraded headsets for 4 users.

The Datavideo ITC-100 is an 8 remote user and base station wired intercom with included tally lights that can use low cost headsets (included) or high quality professional units. Users are connected to the base station via belt packs with the included 65' 5-pin XLR cables. The beltback can be connected with a cable up to 650' from the base station.

The Datavideo HP2A Double-Ear Headset features a closed-back design to reduce outside noise, a soft circumaural earpad and a noise-cancelling microphone. The headphone speaker resists clipping during loud monitoring.

The Datavideo ITC-100SL includes a belt pack and tally light, and it uses the high-grade HP-1 Single-Ear Headset/Microphone.

Please see the links below for more information on the various components of this kit.One of the innovative features of the rack-mountable ITC-100 8-User Wired Intercom System with 4 Beltbacks & 4 Headsets from Datavideo is that it can use headsets ranging from low-cost cell phone headsets to high-quality professional units.

Up to 8 users can be connected to the ITC-100 via PTT wired beltpacks. Four beltpacks, four headsets, four cables and a tally light set are all included. Cables for connecting the beltpacks may be up to 984 ft long, and use 5-pin XLR connectors. The base station features all call and mute buttons, a mic input, built-in speaker, and standard headphone jacks.The Datavideo HP2 Dual-Ear Headset is compatible with Datavideo ITC Intercom Systems. It features a closed-back design to reduce outside noise, soft circumaural earpads and a noise-cancelling microphone. The headphone drivers resist clipping during loud monitoring.The ITC-100SL is a replacement/expansion wired beltpack receiver for use with the ITC-100 intercom system from Datavideo. The ITC-100 includes 4 ITC-100SL beltpacks, but can support up to 4 additional units to support 8 total users.

One of the key features of the ITC-100SL is that it has a standard 3.5mm headphone jack so that you may use any headset you choose, ranging from inexpensive cell-phone sets all the way up to expensive professional models. It also has a 2.5mm jack for Motorola earphones. Other features of the ITC-100SL include call and talk buttons, volume control, a tally light, and a 5-pin XLR connector for talkback, power, and a tally indicator.
This Datavideo ITC100HP2K ITC-100 Intercom, 4x HP-2A Headsets, 4 x ITC-100SL Beltpack and Tallylights Kit from B&H combines an 8-channel intercom system and 65' connecting cables with belt packs, tally lights, and upgraded headsets for 4 users.

The Datavideo ITC-100 is an 8 remote user and base station wired intercom with included tally lights that can use low cost headsets (included) or high quality professional units. Users are connected to the base station via belt packs with the included 65' 5-pin XLR cables. The beltback can be connected with a cable up to 650' from the base station.

The Datavideo HP2A Double-Ear Headset features a closed-back design to reduce outside noise, a soft circumaural earpad and a noise-cancelling microphone. The headphone speaker resists clipping during loud monitoring.

The Datavideo ITC-100SL includes a belt pack and tally light, and it uses the high-grade HP-1 Single-Ear Headset/Microphone.

Please see the links below for more information on the various components of this kit.One of the innovative features of the rack-mountable ITC-100 8-User Wired Intercom System with 4 Beltbacks & 4 Headsets from Datavideo is that it can use headsets ranging from low-cost cell phone headsets to high-quality professional units.

Up to 8 users can be connected to the ITC-100 via PTT wired beltpacks. Four beltpacks, four headsets, four cables and a tally light set are all included. Cables for connecting the beltpacks may be up to 984 ft long, and use 5-pin XLR connectors. The base station features all call and mute buttons, a mic input, built-in speaker, and standard headphone jacks.The Datavideo HP2 Dual-Ear Headset is compatible with Datavideo ITC Intercom Systems. It features a closed-back design to reduce outside noise, soft circumaural earpads and a noise-cancelling microphone. The headphone drivers resist clipping during loud monitoring.The ITC-100SL is a replacement/expansion wired beltpack receiver for use with the ITC-100 intercom system from Datavideo. The ITC-100 includes 4 ITC-100SL beltpacks, but can support up to 4 additional units to support 8 total users.

One of the key features of the ITC-100SL is that it has a standard 3.5mm headphone jack so that you may use any headset you choose, ranging from inexpensive cell-phone sets all the way up to expensive professional models. It also has a 2.5mm jack for Motorola earphones. Other features of the ITC-100SL include call and talk buttons, volume control, a tally light, and a 5-pin XLR connector for talkback, power, and a tally indicator.

Supports up to 8 wired users
Uses your choice of headsets, from low-cost cell phone sets to high-quality professional units
Use cables up to 984 ft to connect beltpacks
Metal Housing
3.5mm Jack for Wide Headset Compatibility
2.5mm Jack for Motorola Earphones
Tally Indicator Connection
Talk and Call Buttons
Volume Control
Connects to Base Station Via 5-pin XLR for Power and Communication

 

Supports up to 8 wired users

 

Uses your choice of headsets, from low-cost cell phone sets to high-quality professional units
Use cables up to 984 ft to connect beltpacks
Metal Housing
3.5mm Jack for Wide Headset Compatibility
2.5mm Jack for Motorola Earphones
Tally Indicator Connection
Talk and Call Buttons
Volume Control
Connects to Base Station Via 5-pin XLR for Power and Communication